Parallel Port Dell Docking Station Laptop

More
9 years 10 months ago #83943 by WhyMe1
Parallel Port Dell Docking Station Laptop was created by WhyMe1
NewBee again . I pick up a Dell D620 Docking Station PR01X has a Parallel Port (It was Free). Anyone use this type of setup and will this work with Linux CNC ?

Please Log in to join the conversation.

More
9 years 10 months ago #83946 by tommylight
Replied by tommylight on topic Parallel Port Dell Docking Station Laptop
I do not have a d620, but i have plenty of e4200/e4300/e6400/e6510 with paraports on docking stations, and all do work, but the latency is bad, so i have to bump it up to 300000 for the base thread. Some have been in use for over 2 years without issues.

Please Log in to join the conversation.

More
9 years 10 months ago #84083 by WhyMe1
Replied by WhyMe1 on topic Parallel Port Dell Docking Station Laptop
Thank You.
Question do you run LinuxCNC from HD or CD/DVD or Flash Drive ?

Please Log in to join the conversation.

More
9 years 10 months ago #84092 by tommylight
Replied by tommylight on topic Parallel Port Dell Docking Station Laptop
From HDD and from USB.

Please Log in to join the conversation.

Time to create page: 0.071 seconds
Powered by Kunena Forum