tommylight wrote: How's the retro going?
Regards,
Tom
Getting everything ready to cut the cord......
I/O is straightened out, had to obtain and fabricate solder etc about 115 wires onto connectors that will mate with cables coming from existing relay boards.
Testing firing a bunch of relays for devices re: solenoids, air valves for checking, spot check. Still have to test every output to see if existing wiring numbers are ok.
One of the first things i have to check is a difference in potential between the two com....if that is ok, then i am set.
Going good, now i am at the airport on a 2. Day buisness trip. Argkkk!!
Return on thursday.
