Default Spindle Speed

beltramidave
Topic Author
Offline
Premium Member

9 years 10 months ago #84562 by beltramidave

Default Spindle Speed was created by beltramidave

I am looking for ideas as to why when I manually start my spindle (using spindle start icon), that I get no speed reference, despite in the .ini file under the Display heading, my Default_Spindle_Speed = 8000.. The only way I can get any movement out of the spindle (vfd), is by clicking on the speed + icon.
Thanks

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

9 years 10 months ago #84583 by cmorley

Replied by cmorley on topic Default Spindle Speed

What version of linuxcnc are you using and what screen.
A copy of your INI file might help too please.

Chris M

Please Log in to join the conversation.

beltramidave
Topic Author
Offline
Premium Member

9 years 10 months ago #84587 by beltramidave

Replied by beltramidave on topic Default Spindle Speed

I am using Axis 2.5.0. I will have to copy the .ini file.
Attached is a screen shot.

Please Log in to join the conversation.

Time to create page: 0.074 seconds