Fullscreen - Startscreen

Holzwurm56
Topic Author
Offline
Elite Member

9 years 10 months ago #84904 by Holzwurm56

Fullscreen - Startscreen was created by Holzwurm56

Hello,
what can I do that LinuxCNC starts in fullscreenmodus? In windows i can select this. What is the way in linux?

Thanks

Hans

Please Log in to join the conversation.

tommylight
Offline
Administrator

9 years 10 months ago #84905 by tommylight

Replied by tommylight on topic Fullscreen - Startscreen

forum.linuxcnc.org/forum/21-axis/29735-axis-modifications

Please Log in to join the conversation.

newbynobi
Offline
Platinum Member

9 years 10 months ago #84918 by newbynobi

Replied by newbynobi on topic Fullscreen - Startscreen

If you use gmoccapy as GUI, you can set the start mode on the settings page.

Norbert

Please Log in to join the conversation.

Holzwurm56
Topic Author
Offline
Elite Member

9 years 10 months ago #84921 by Holzwurm56

Replied by Holzwurm56 on topic Fullscreen - Startscreen

Hello Newbynobi,
i will be happy when i am able to run my machine with linuxcnc and axis. I think Gmoccapy will be to difficult for me, about axis are more informations in the www available.

Thanks

Hans

Please Log in to join the conversation.

newbynobi
Offline
Platinum Member

9 years 10 months ago #84923 by newbynobi

Replied by newbynobi on topic Fullscreen - Startscreen

The difference is only the DISPLAY Entry in you Ini file ;-)

Norbert

Please Log in to join the conversation.

Time to create page: 0.088 seconds