can you add a measurement field and a go to button to emc2

More
9 years 8 months ago #87458 by andypugh
Replied by andypugh on topic can you add a measurement field and a go to button to emc2
The config picker looks for INI files, is your gladevcp referenced by any INI file?

Please Log in to join the conversation.

More
9 years 8 months ago #87461 by Pause22
Replied by Pause22 on topic can you add a measurement field and a go to button to emc2
i think it was saved as a .glade file should it be .INI?
thanks

Please Log in to join the conversation.

More
9 years 8 months ago #87464 by andypugh
Replied by andypugh on topic can you add a measurement field and a go to button to emc2
No, it should be a .glade file, but it needs to be added to a LinuxCNC config, as described in the link I gave you.

Please Log in to join the conversation.

More
9 years 8 months ago #87468 by Pause22
Replied by Pause22 on topic can you add a measurement field and a go to button to emc2
I did as it said in the link made a directory in linuxcnc config and saved it ,but i cant see it when i try to find it using config picker..

Please Log in to join the conversation.

More
9 years 8 months ago #87485 by andypugh
Replied by andypugh on topic can you add a measurement field and a go to button to emc2
Does your new directory contain the files from the link in the tutorial?
One of those is an INI file.

Please Log in to join the conversation.

More
9 years 8 months ago #87497 by Pause22
Replied by Pause22 on topic can you add a measurement field and a go to button to emc2
No it doesn't contain an INI file,also I created a folder is that the same as a directory?

Please Log in to join the conversation.

More
9 years 8 months ago #87498 by andypugh
Replied by andypugh on topic can you add a measurement field and a go to button to emc2
Download the folder, save it into your config folder.
(yes, folder / directory, same thing)
goinglinux.com/articles/DirectoryVsFolder.html

Please Log in to join the conversation.

More
9 years 8 months ago #87522 by Pause22
Replied by Pause22 on topic can you add a measurement field and a go to button to emc2
sorry i think i must be overthinking this,but where is the file i,m going to download ?

Please Log in to join the conversation.

More
9 years 8 months ago #87523 by andypugh
Replied by andypugh on topic can you add a measurement field and a go to button to emc2
On page 2 of the tutorial (section 6). I assume you have got that far, because the first page doesn't mention making a directory.

Please Log in to join the conversation.

More
9 years 8 months ago #87568 by Pause22
Replied by Pause22 on topic can you add a measurement field and a go to button to emc2
thanks for your patience,,i have got there now ,next problem i don't seem to have Gedit

Please Log in to join the conversation.

Time to create page: 0.053 seconds
Powered by Kunena Forum