HAL config for linear encoder and stepper motor

finaly found the time to finish the config files (HAL and INI )
added are the HAL and INI configer to run 1 stepper motor with
liniear encoder (puls on phase A only) with Gecko g540 as a driver.

will update apon testing and results.
would love to get feedback on the files (forshour i missed some thing).

Big thanks to Todd and the comunety for shearing info and reply

Hello mgadid!
I'm also trying to do what you did! using encoder with steppers. I'm looked at you file and got some errors, but I think you may already have updated the files, am I right? Could you share your results? May we could work together with this!
thanks!

Hi, i had some errors and fixed them. but i didn't continue with this project.
added are my last files i worked on.
in the file you will find comments that will help you figure what i have done.

it will be great if you publish your finshed file.

good luck,
moshe