Connecting a single 7i76 to the P2 connector on 5i25

I can guarantee that the Rapid Turn will never be used in this application.

Ultimately, I will have to learn the process, but if you can make the bit for me, it would be a great help!

The Tormach side has to be XYZA. The Pinout that I provided reflects this.

Do you require any additional info from me ?

Here is a bitfile and the new pinout source file:

freeby.mesanet.com/tm_76.zip

Looks Perfect!

Thank you SO much!

NP, it's pretty easy to make new bitfiles _if_ you are setup to do it.
I basically I just copy-pasted bits of two pinout files(Tormach and 7I76X2)
together, adjusted a few module count numbers and names and re-compiled

PCW wrote: NP, it's pretty easy to make new bitfiles _if_ you are setup to do it

I got as far as setting up an Amazon AWS instance to do this, but then failed to get round to making the web front-end that I thought was needed to allow people to make their own bitfiles.