I use these script via ssh ...
Code:
#! /usr/bin/python
import sys
import linuxcnc
c = linuxcnc.stat()
c.poll()
a = c.file
sys.exit(a)
I have four machine, one with no gui at all and all command is send via modbus->halui .. for charge new .ngc I use script and ssh ...
the scrip above works fine in 3 machine (with axis interface only for test ... but it works all via modbus->halui) ... but the script return any time empty string with machine with no-gui ....
I need a gui interface for run these command ar not??
regards
giorgio
