Deb installs (like nativecam) typically put required executables
in a system directory (usually /usr/bin) so that they are available
to all users with a standard PATH setting in their environment.
Full path names are seldom required for such executables.
You can run some shell commands to see if the deb is installed correctly.
For example:
Code:
$ dpkg -l nativecam # Check if pkg is installed (-l (letter) not -1 (one))
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-==========-========-============-=================================
ii nativecam 0.1.6 all Conversational programming for Li
$ dpkg -L nativecam|grep bin # List all files with bin in name
/usr/bin
/usr/bin/nativecam
/usr/bin/ncam
$ which ncam # Check if ncam is in your PATH
/usr/bin/ncam
$ ls -lL $(which ncam) # Verify x bits (-l -L)
-rwxr-xr-x 1 root root 185795 Jul 16 20:31 /usr/bin/ncam
$ ncam -h # Test if it is there using just -h
Standalone Usage:
ncam [Options]
Options :
...
The standard PATH almost always includes /usr/bin
