Hello! I have a problem with my 3-axis gantrykins machine. X and Y have max speed 15000 mm/min (rack and pinion), Z just 4000 mm/min (ball screw). I wrote the same MAX_VELOCITY for each axis, but when I do G0 the machine drives Z with max speed 15000 mm/min (MAX_LINEAR_VELOCITY ). How to solve this problem?
Thanks!
In ini file I have already write MAX_VELOCITY=66.667 for Z and 250 for X and Y. When I run G0 code the machine do this command with max speed by X/Y=15 m/min and Z=15 m/min despite Z speed limit. This problem appears only in gantrykins. When I try to control the machine in trivkins all is well. How to set Z speed limit correctly in gantrykins?
