gscreen industrial virtual keyboard on Debian strech

More
8 years 8 months ago #105971 by mpvriens
see screenshot

Attachment not found

Please Log in to join the conversation.

More
8 years 8 months ago #105988 by cmorley
Well it is using the modified file:
**** GSCREEN INFO: handler file path:

have you modified the GLADE file?

Could you post your whole config here and I'll look at it?
If not I'll get you to add some debugging print statements.

Sorry it should have been easier then this :)

Chris M

Please Log in to join the conversation.

More
8 years 8 months ago #106172 by mpvriens
Hi Chris,

Some result, at leased when toggle the keyboard button it generates some figures, attached the config, and screen print

Attachment not found


Attachment not found


Attachment not found


Attachment not found


Attachment not found


Attachment not found


(have temp. renamed industrial_handler.pyc to add it to this post)

Please Log in to join the conversation.

More
8 years 8 months ago #106176 by cmorley
something went wrong there is no attachments.
probably easiest to zip the whole config folder and post

Chris M

Please Log in to join the conversation.

More
8 years 8 months ago #106216 by mpvriens
see attachement

Attachment not found

Please Log in to join the conversation.

More
8 years 8 months ago #106217 by mpvriens
Also have attached the printscreen


Attachment not found

Please Log in to join the conversation.

More
8 years 8 months ago #106218 by cmorley
Hmmm well it works fine for me :)

If you open a terminal and type :
matchbox-keyboard
Does it display?

Chris M

Please Log in to join the conversation.

More
8 years 8 months ago #106223 by mpvriens
Yes when I open terminal and type: matchbox-keyboard, it display the keyboard, only on my linux g-screen it would not appear

Please Log in to join the conversation.

More
8 years 8 months ago #106233 by rodw
I don't know if its relevant but I could never get matchbox to work with gmoccappy so I used onboard instead. It has had a bit of a checkered history with Linux Mint and it disappeared from my config but now its back in the repositories. I found I had to add a startup command to start it otherwise it did not display.

Please Log in to join the conversation.

More
8 years 8 months ago #106234 by mpvriens
As far as i could find, "onboard"is not supported by Debian strech

Please Log in to join the conversation.

Time to create page: 0.065 seconds
Powered by Kunena Forum