Development version problem?

auto-mation-assist
Topic Author
Offline
Platinum Member

8 years 8 months ago #106114 by auto-mation-assist

Development version problem? was created by auto-mation-assist

I noticed that the development version I just download had increased in size by over 10mb from usual. So its near 110mb. It also reported that it needed yapps which is unusual. It also does not build the standard supplied gui's.

Very strange.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

8 years 8 months ago #106163 by cmorley

Replied by cmorley on topic Development version problem?

There was a change about yapps. Linuxcnc had an version in the code base, now an external version is required yapps2

not sure about the size though.

Chris M

Please Log in to join the conversation.

Time to create page: 0.114 seconds