I need for help for config my cnc

Try changing

loadrt sim_parport names=parport.0

Read about sim_parport here
to

loadrt hal_parport cfg="0x378"
if your Parallel port is at 0x378

For more info www.inet.home/linuxcnc/hal/parallel-port.html

link from post, does not load

Yes you have loaded a sim version with stepconf So if you have not changed any files, run stepconf again with your config and un-check the box " Create Simulated Hardware" on the first page " then you will see the PP option

Thanks to all who gave advice and helped me!
My mistake was that in the initial steppe window I put a teak on "Create Simulated Hardware", just like # Clive s said.
I made the change and now LinuxCNC started managing my CNC.
Thanks again for the help, I am very happy

Glad you got it sorted, it was ozzyrob that spotted it

mitakata_net wrote: link from post, does not load

Sorry was looking at my local server.........must remember to put brain in gear, just for completeness links fixed

linuxcnc.org/docs/2.7/html/man/man9/sim_parport.9.html

linuxcnc.org/docs/2.7/html/hal/parallel-port.html

Thank you very much!
Everything works perfectly