Stepconf error: unsupported locale setting

Hello, I am trying to open Stepconf and i can't! I need help to solve this

The error message:

Stepconf encountered an error.
The following information may be useful in troubleshooting:

Traceback (most recent call last):
File "/usr/bin/stepconf", line 73, in <module>
locale.setlocale(locale.LC_ALL, '')
File "/usr/lib/python2.7/locale.py", line 547, in setlocale
return _setlocale(category, locale)
Error: unsupported locale setting

I've changed the language from portuguese to english and then occurs that error!
I prefer in english but return to portuguese and no more errors !
Thanks anyway!

I did have a bit of a look for the cause of this. It is not Inuxcnc specific. It seems it is due to missing language support or in the OS itself.

This might solve your problem.
stackoverflow.com/questions/14547631/pyt...orted-locale-setting

I had changed the language from Portuguese to English and this error occurred. I switched back to Portuguese and it worked without problems. Thank you for your help

rodw wrote:

I did have a bit of a look for the cause of this. It is not Inuxcnc specific. It seems it is due to missing language support or in the OS itself.

This might solve your problem.
stackoverflow.com/questions/14547631/pyt...orted-locale-setting

Code:

sudo apt-get install language-pack-en sudo dpkg-reconfigure locales

 

Well, I have the same locale issue. language pack installation failed as it says "E: Unable to locate package language-pack-en".

I think i need to add repository. what is that??
 

That link explains (for the lazy) to do this in terminal:

export LC_ALL="en_US.UTF-8" & export LC_CTYPE="en_US.UTF-8" & sudo dpkg-reconfigure locales

Mark your desired language(s) with spacebar and proceed through the prompts. Note mine also included es_US which was removed. When complete, close and try stepconf / pncconf again and it should work.