Missing Hm2_eth. Trying to connect to a 7i96

dbanks
Topic Author
Offline
Senior Member

8 years 5 months ago #109978 by dbanks

Missing Hm2_eth. Trying to connect to a 7i96 was created by dbanks

Can't seem to locate hm2_eth. Also won't let me use mesaflash as a command. I'm on RTAI. We have the board connected, but not really making any progress in any direction with LinuxCNC. Has anyone had these same issues?

Please Log in to join the conversation.

dgarrett
Offline
Platinum Member

8 years 5 months ago #109980 by dgarrett

Replied by dgarrett on topic Missing Hm2_eth. Trying to connect to a 7i96

Code:

$ man hm2_eth
...
 hm2_eth is only available when linuxcnc is configured with "uspace" realtime.
...

Please Log in to join the conversation.

PCW
Offline
Platinum Member

8 years 5 months ago #109996 by PCW

Replied by PCW on topic Missing Hm2_eth. Trying to connect to a 7i96

Probably the easiest way to get the uspace version of LinuxCNC and the proper kernel is to install the
LinuxCNC Debian Stretch test ISO:

www.linuxcnc.org/testing-stretch-rtpreempt/

Please Log in to join the conversation.

Time to create page: 0.205 seconds