Mesa 7i92 required iso flavour link

More
8 years 3 months ago #114877 by Clive S
Mesa 7i92 required iso flavour link was created by Clive S
I have ordered a Mesa 7i92 to dive a 3 axis small mill. In the past I have used 5i25/7i76 stuff.

Which version of Lcnc will I need to drive this? I was thinking stretch-usrspace I386 as I have the iso for that already is this correct?

Please Log in to join the conversation.

More
8 years 3 months ago #114878 by tommylight
Replied by tommylight on topic Mesa 7i92 required iso flavour link
Yes it is.

Please Log in to join the conversation.

More
8 years 3 months ago #114880 by Todd Zuercher
Replied by Todd Zuercher on topic Mesa 7i92 required iso flavour link
That one would work.

Please Log in to join the conversation.

More
8 years 3 months ago #114881 by Clive S
Replied by Clive S on topic Mesa 7i92 required iso flavour link
Thanks for the speedy response, can't wait to try it out now.

Please Log in to join the conversation.

Time to create page: 0.085 seconds
Powered by Kunena Forum