Can linuxcnc work without using the GUI?

More
8 years 1 month ago #117042 by myz
Can linuxcnc work without using the GUI? was created by myz
I want to know, can linuxcnc work without using the GUI?

Please Log in to join the conversation.

More
8 years 1 month ago #117045 by mungkie
Replied by mungkie on topic Can linuxcnc work without using the GUI?
yes

Please Log in to join the conversation.

More
8 years 1 month ago #117189 by andypugh
Replied by andypugh on topic Can linuxcnc work without using the GUI?
Yes, but it can be awkward to make anything happen.

If you change DISPLAY from "Axis" to "halui" you can do it very simply.
But you will note that it isn't easy to do very much.
(everything can be done from the command line, but it's awkward)

Please Log in to join the conversation.

More
8 years 1 month ago #117202 by cmorley
Replied by cmorley on topic Can linuxcnc work without using the GUI?
there is also linuxcncrsh
linuxcnc.org/docs/2.7/html/man/man1/linuxcncrsh.1.html

Chris M

Please Log in to join the conversation.

Time to create page: 0.079 seconds
Powered by Kunena Forum