LinuxCNC site

More
8 years 1 day ago #119647 by dennis.lewis5
LinuxCNC site was created by dennis.lewis5
I have not been able to get to the linuxcnc.org site for some time. Is it still out there?

Please Log in to join the conversation.

More
8 years 1 day ago #119648 by tommylight
Replied by tommylight on topic LinuxCNC site
It is working.

Please Log in to join the conversation.

More
8 years 19 hours ago #119695 by andypugh
Replied by andypugh on topic LinuxCNC site

dennis.lewis5 wrote: I have not been able to get to the linuxcnc.org site for some time. Is it still out there?


You can try checking at this site

downforeveryoneorjustme.com/

(seriously, that's a real URL and a useful tool).

I am not aware of any problems with linuxcnc.org in recent weeks.

Please Log in to join the conversation.

More
8 years 3 hours ago #119746 by dennis.lewis5
Replied by dennis.lewis5 on topic LinuxCNC site
I found the problem was with my router. I rebooted and was able to reach the site. Thanks for the feedback.

Please Log in to join the conversation.

Time to create page: 0.082 seconds
Powered by Kunena Forum