http://www.linuxcnc.org/handbook/RS274NGC_3/RS274NGC_38a.html#999268

More
7 years 11 months ago #120893 by svend-ev
http://www.linuxcnc.org/handbook/RS274NGC_3/RS274NGC_38a.html#999268 was created by svend-ev
Hello

I am new, in the forum. And be patient, English i is not my favorite language.

www.linuxcnc.org/handbook/RS274NGC_3/RS274NGC_38a.html#999268

I found the previous link at "./home/linuxcnc/nc_files/examples/comp311.ngc"

But it is not working?

--
svend-ev

Please Log in to join the conversation.

More
7 years 11 months ago #120999 by andypugh
Replied by andypugh on topic http://www.linuxcnc.org/handbook/RS274NGC_3/RS274NGC_38a.html#999268
linuxcnc.org/docs/2.7/html/gcode/tool-compensation.html

Is the not-quite-so-ancient link

Please Log in to join the conversation.

Time to create page: 0.079 seconds
Powered by Kunena Forum