linuxcnc stretch 32 bit with mesa 7i92

I have the 64 bit working ok.

But I have an old pc that won't accept the 64 bit version.

I am having trouble with the 32 bit version will this version work with the 7i92

Is this the 32 bit Stretch ISO image?

www.linuxcnc.org/testing-stretch-rtpreem...-uspace-i386-r13.iso

The errors don't seem hardware related, is it possible you are using a hal/ini file from a different LinuxCNC version?

How old? i have some 6 or 7 year old ones running Debian Stretch or Linux Mint 64 bit with Preempt-RT quite nicely.
That should work as it requires Preempt-RT of the kernel, not 64 bit versions.

Yeah, to late to the party, had opened it earlier.

Yes that is the version
Yes I am using the hal and ini files from the 64 bit version

I did not realise that the two version were different. What are the main differences.

Theres no difference in the hal and ini files for 32 or 64 bit LinuxCNC
I was thinking maybe a 2.7/2.8 issue

PCW wrote: Theres no difference in the hal and ini files for 32 or 64 bit LinuxCNC
I was thinking maybe a 2.7/2.8 issue

I never thought about that. I will check it out tomorrow.

So I might need to start from scratch with a new config. Does the version I am using require userspace?

PCW :wrote Theres no difference in the hal and ini files for 32 or 64 bit LinuxCNC
I was thinking maybe a 2.7/2.8 issue

Yes that was the reason I had to alter the hal and ini files to the 2.7 standards.
Everything Ok now. Thanks for the pointer.