Help with identifying sinking or sourcing inputs,outputs.

Loafer
Topic Author
Offline
New Member

7 years 10 months ago #122345 by Loafer

Help with identifying sinking or sourcing inputs,outputs. was created by Loafer

I am retrofiting 1997 Milltronics VM17 to Linuxcnc using Mesa. I am trying to match the Mesa board correctly. Can you tell by these schematic pictures?

Please Log in to join the conversation.

tommylight
Offline
Administrator

7 years 10 months ago #122364 by tommylight

Replied by tommylight on topic Help with identifying sinking or sourcing inputs,outputs.

It looks like active low inputs.

Please Log in to join the conversation.

Loafer
Topic Author
Offline
New Member

7 years 10 months ago #122407 by Loafer

Replied by Loafer on topic Help with identifying sinking or sourcing inputs,outputs.

Thank you.

Please Log in to join the conversation.

Time to create page: 0.092 seconds