Finished parts ending like they were offset some how...

More
7 years 10 months ago #123050 by Leon82
Replied by Leon82 on topic Finished parts ending like they were offset some how...
Double Check the coupler between the motor and ball screw

Please Log in to join the conversation.

More
7 years 10 months ago #123056 by tommylight
Replied by tommylight on topic Finished parts ending like they were offset some how...
That looks like you have active offsets.

Please Log in to join the conversation.

More
7 years 10 months ago #123068 by Marcking
Replied by Marcking on topic Finished parts ending like they were offset some how...
Thank you tommylight, there is G40 on, there is another offset we need to turn off?
Also tool compensation usually does not move to one side only, G41/G42 would left a part that could be smaller or bigger but not shifted, I think...

Please Log in to join the conversation.

More
7 years 10 months ago #123069 by Marcking
Replied by Marcking on topic Finished parts ending like they were offset some how...
Leon82, do you think mechanical play could be reflected on the graphic screen? besides machine mechanics has been verified.
Thanks.

Please Log in to join the conversation.

More
7 years 10 months ago #123073 by Leon82
Replied by Leon82 on topic Finished parts ending like they were offset some how...

Marcking wrote: Leon82, do you think mechanical play could be reflected on the graphic screen? besides machine mechanics has been verified.
Thanks.


I'm not sure I kind of responded before realizing there was 3 pages of discussion

Please Log in to join the conversation.

More
7 years 10 months ago #123101 by Marcking
Replied by Marcking on topic Finished parts ending like they were offset some how...
Ha ha ha, there is another subject on discussion anyway.
Thank you for enter the topic.

Please Log in to join the conversation.

More
7 years 10 months ago #123201 by andypugh
Replied by andypugh on topic Finished parts ending like they were offset some how...
Possibly stray XY tool offsets in the tool table? Typically a mill would never use the XY columns.

Please Log in to join the conversation.

More
7 years 10 months ago #123213 by Marcking
Replied by Marcking on topic Finished parts ending like they were offset some how...
Hi Andy, we are using the gmoccapy screen and not using tool compensation at all G40 is at the beginning of the program.

Please Log in to join the conversation.

More
7 years 10 months ago #123216 by andypugh
Replied by andypugh on topic Finished parts ending like they were offset some how...
I am talking about tool offset, not compensation.
Tools can have lengths in all axes, not just Z.

Please Log in to join the conversation.

More
7 years 10 months ago #123220 by Marcking
Replied by Marcking on topic Finished parts ending like they were offset some how...
sure they do!, but only using G41/G42 they use radius or diameter compensation, also as stated before part will end up bigger or smaller not shifted.

Please Log in to join the conversation.

Time to create page: 0.060 seconds
Powered by Kunena Forum