Axis, joints and soft limits confusion.

More
7 years 7 months ago #127405 by andypugh
Replied by andypugh on topic Axis, joints and soft limits confusion.

vmihalca wrote: You are RIGHT!
This was the problem!
You saved my day!
Thanks!


Which answer was the solution?

Please Log in to join the conversation.

More
7 years 7 months ago #127417 by pl7i92
Replied by pl7i92 on topic Axis, joints and soft limits confusion.
i woudt also like to know what did your day

Please Log in to join the conversation.

More
7 years 7 months ago #127423 by vmihalca
Replied by vmihalca on topic Axis, joints and soft limits confusion.
It was a soft limits problem, the bold values are what I'm using now, the other ones are what I was using.

MIN_LIMIT = -360 ; -365.0
MAX_LIMIT = 0.001 ; -5.0
HOME_OFFSET = 5 ; 0.000000

Thank you all for supporting this forum.

Please Log in to join the conversation.

More
7 years 7 months ago #127435 by joekline9
Replied by joekline9 on topic Axis, joints and soft limits confusion.
After homing try insert tool 1, then M6 T1 G43 then touch off tool 1 to top of part.

Please Log in to join the conversation.

Time to create page: 0.087 seconds
Powered by Kunena Forum