Multiple tools on the CNC

7 years 5 months ago #132973 by pl7i92

Replied by pl7i92 on topic Multiple tools on the CNC

peter you mostly can even BY dip switch drives to 0-10V
wher 5 is the Zero run 4.95 5.15 logeritmic scale

Please Log in to join the conversation.

7 years 5 months ago #133297 by Peterdeleu

Replied by Peterdeleu on topic Multiple tools on the CNC

Does this mean that you can simply switch the polarization to let the servo motors run in revers?

Please Log in to join the conversation.

Time to create page: 0.051 seconds