Motor Pairing

Project_Hopeless
Topic Author
Offline
Elite Member

7 years 6 months ago #130634 by Project_Hopeless

Motor Pairing was created by Project_Hopeless

With the release version LinuxCNC 2.7.14 can you pair (mirror/clone) two motors to a single axis? I read a recent post that said you need a beta version 2.8 to achieve this.

Is this true?

Please Log in to join the conversation.

PCW
Offline
Platinum Member

7 years 6 months ago #130636 by PCW

Replied by PCW on topic Motor Pairing

You have always been able to pair motors with LinuxCNC
What 2.8 gives you is better separation of joints and axis
and also allows gantry homing/squaring with 2 limit switches per axis

Please Log in to join the conversation.

Time to create page: 0.078 seconds