- Posts: 19306
- Thank you received: 0
question about offset
7 years 6 months ago #131720
by andypugh
Yes, you can use a whole range of better interfaces than the parallel port. In fact you can't use many worse ones
wiki.linuxcnc.org/cgi-bin/wiki.pl?LinuxCNC_Supported_Hardware
Replied by andypugh on topic question about offset
sm wrote: yes, andypugh - parallel port. can it be anything else with linuxcnc?
Yes, you can use a whole range of better interfaces than the parallel port. In fact you can't use many worse ones
wiki.linuxcnc.org/cgi-bin/wiki.pl?LinuxCNC_Supported_Hardware
Please Log in to join the conversation.
Time to create page: 0.074 seconds