how to hook up parelllal port pins with gmoccapy

More
7 years 5 months ago #133725 by phoenix
how to hook up parelllal port pins with gmoccapy was created by phoenix
my machine is running ok on axis but now when i open gmoccapy i just cant find its configration files does anyone know where are they located
also ~~~ my pc suddenly stopped showing Usr directory in etc if anyone knows the reason most welcome to help :p

Please Log in to join the conversation.

  • InMyDarkestHour
  • New Member
  • New Member
More
7 years 5 months ago #133733 by InMyDarkestHour
Replied by InMyDarkestHour on topic how to hook up parelllal port pins with gmoccapy
usr in etc ? It would be weird if it was there.

you should have /usr

What distro are you using ?

Please Log in to join the conversation.

More
7 years 5 months ago #133770 by phoenix
Replied by phoenix on topic how to hook up parelllal port pins with gmoccapy
It's Debian wheezy

Please Log in to join the conversation.

More
7 years 5 months ago #133772 by pl7i92
Replied by pl7i92 on topic how to hook up parelllal port pins with gmoccapy
why dident you just copy the folder of the mashine
and give it a DISPLAY change

make shure no pyvcp panel is in config
a basic config can at any time be changed from axis to gmoccapy

/home/yourname/linuxcnc/configs

Please Log in to join the conversation.

  • InMyDarkestHour
  • New Member
  • New Member
More
7 years 5 months ago #133776 by InMyDarkestHour
Replied by InMyDarkestHour on topic how to hook up parelllal port pins with gmoccapy
If /usr is missing he's got bigger problems.

Please Log in to join the conversation.

More
7 years 5 months ago #133838 by phoenix
Replied by phoenix on topic how to hook up parelllal port pins with gmoccapy
exactly how can i get my usr folder back i installed linux cnc again also updated it but same problem occures i cant see my etc/usr/share

Please Log in to join the conversation.

More
7 years 5 months ago #133844 by pl7i92
Replied by pl7i92 on topic how to hook up parelllal port pins with gmoccapy
You may have Messed up with SUDO

BEST is to start over with a frech clean Harddrive or patition
and a new iso
or go to
gnipsel.com/linuxcnc/uspace/debian9-emc.html
This side provides the latest info as of uspace and 2.8 also qtvcp Gui

Please Log in to join the conversation.

  • InMyDarkestHour
  • New Member
  • New Member
More
7 years 5 months ago #133871 by InMyDarkestHour
Replied by InMyDarkestHour on topic how to hook up parelllal port pins with gmoccapy
there is no /etc/usr/share

there is:
/etc
/usr
/usr/share

www.dummies.com/computers/operating-syst...-file-system-basics/

Or for more info
www.google.com/search?q=linus+filesystem+basic

This is not the correct forum to use to learn about Linux in general terms, this forum is particular to the software Linuxcnc not Linux as an OS.

Please Log in to join the conversation.

Time to create page: 0.084 seconds
Powered by Kunena Forum