Do i need external thc hardware while using gmoccapy??

More
7 years 5 months ago #134316 by phoenix
Do i need external thc hardware while using gmoccapy?? was created by phoenix
do i need external thc circuit or linuxcnc internal thc is enough

If i need external thc i need external corner lock signal...... On pin 15.
Amy help would be greatly appreciated

Please Log in to join the conversation.

More
7 years 5 months ago #134330 by pl7i92
Replied by pl7i92 on topic Do i need external thc hardware while using gmoccapy??
Hi
THC is for Plasma
it is requirerd to keep the nozzle same distance over the Huge not flat Workarea
you can do plasma without

nothing to do with gmccapy

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum