7i92M-7i77 config

Does PNCConf have 7i92 / 7i77 config? I dont remember seeing ethernet boards.

IF not, would anyone like to share a basic 7i92 - 7i77 config? XYYZ

Jumping in the mesa ethernet world. I've always used 5i25's.....

Thanks, I'll check the sim if there are any..

Bob

I know pncconf in LinuxCNC master supports the 7I92, not sure about the version with 2.7.14

If its not supported, its not a big deal to change a 5I25 config to a 7I92 config,
basically you do a global replace of "5i25" with "7i92" in the hal file,
replace hm2_pci with hm2_eth, and add the IP address to the loardrt hm2_eth line

Use the force, Luke........hmmmm use the "search and replace" feature in all text editors in Linux, or Ctrl+h.
Makes life much easier.

like for the eeprom adress jumperd

loadrt hm2_eth board_ip=192.168.1.121 config="num_stepgens=4, num_encoders=0, num_pwmgens=1"
setp hm2_7i92.0.pwmgen.pwm_frequency 100000
setp hm2_7i92.0.pwmgen.pdm_frequency 6000000
setp hm2_7i92.0.watchdog.timeout_ns 10000000