Comamdo de linuxcnc

More
7 years 5 months ago #134844 by pachi_electronic
Comamdo de linuxcnc was created by pachi_electronic
hola como hago para sacar los botones -X +X...-Y +Y.....-Z +Z...que se vean en la interface grafica de linuxcnc y para buscar el punto de origen con que comando....soy principiante en este programa gracias a todos de esete foro

Please Log in to join the conversation.

More
7 years 5 months ago #134851 by BigJohnT
Replied by BigJohnT on topic Comamdo de linuxcnc
¿Qué GUI estás usando?

Note: I don't speak Spanish but used Google translate.

JT

Please Log in to join the conversation.

More
7 years 5 months ago #134856 by pachi_electronic
Replied by pachi_electronic on topic Comamdo de linuxcnc
estoy ulizando Debian 7.9 wheezy.....Linuxcnc 2.7.14...soy novato en linuxcnc....estoy aprendiendo utilizarlo

Please Log in to join the conversation.

More
7 years 5 months ago #134858 by pachi_electronic
Replied by pachi_electronic on topic Comamdo de linuxcnc
estoy ulizando Debian 7.9 wheezy.....Linuxcnc 2.7.14...soy novato en linuxcnc....estoy aprendiendo utilizarlo

Please Log in to join the conversation.

More
7 years 5 months ago #134880 by pl7i92
Replied by pl7i92 on topic Comamdo de linuxcnc
¿Qué máquina tienes?

Que hardware tienes Stepper servo Board Driver

Mejor el nuevo Debian 9.0 Stretch

si no todo ya funciona
www.linuxcnc.org/testing-stretch-rtpreempt/

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum