installing real time kernal

More
7 years 5 months ago #135153 by phoenix
Replied by phoenix on topic installing real time kernal
sir i have debian 9 with linuxcnc 2.7.14 and today i compiled plasmac on it how do i know which linuxcnc is starting when i type linuxcnc on terminal
cause i cant see plasmac configration
my appologies for bothering you

Please Log in to join the conversation.

More
7 years 5 months ago #135159 by rodw
Replied by rodw on topic installing real time kernal
the key is the rip-environment as it tells where to find the files. If you get it right you will see 2.8 when it starts.

Please Log in to join the conversation.

More
7 years 5 months ago #135214 by andypugh
Replied by andypugh on topic installing real time kernal
You need to give a path that leads to the linuxcnc-dev/scripts directory.

So, if you are in your home folder the command would be
Code:
. ./linuxcnc-dev/scripts/rip-environment

And it does need to be dot - space - dot - slash

Please Log in to join the conversation.

More
7 years 5 months ago #135235 by phoenix
Replied by phoenix on topic installing real time kernal
Sir
i did as u suggested set the rip enviroment and then run now its 2.8
but i cant see any plasmac configration lil help needeed
thank you
attaching my scrrenshot to give you a better idea of a problem

Attachment not found

Please Log in to join the conversation.

More
7 years 5 months ago #135236 by phoenix
Replied by phoenix on topic installing real time kernal
my apologies for being so desprate :)
i found plasmac conf it more than awesome sirr....
but still unable to find reverse run in axis plasmac inteface
but i must say interface is legendery for plasma
thanks again

Please Log in to join the conversation.

More
7 years 5 months ago #135237 by rodw
Replied by rodw on topic installing real time kernal
The plasmac sims have moved. Look under the by_machine list. I think its there.
I have not upgraded to the latest version yet. Please tell us if the enable torch button is in red and green for debugging another issue

Please Log in to join the conversation.

More
7 years 5 months ago #135239 by rodw
Replied by rodw on topic installing real time kernal
Under paused motion but the buttons are disabled unless you are running gcode

Attachment not found



I can't help further as I have not used that feature.

Please Log in to join the conversation.

More
7 years 5 months ago #135240 by phoenix
Replied by phoenix on topic installing real time kernal
cant i reverse run in axis???

Please Log in to join the conversation.

More
7 years 5 months ago #135241 by phoenix
Replied by phoenix on topic installing real time kernal
sir that buttons in axis opens when i pause the code but i think they are not working tried rev and fwd but it di=oesnt do anything

Please Log in to join the conversation.

More
7 years 5 months ago #135244 by phoenix
Replied by phoenix on topic installing real time kernal

Bhushan wrote: sir that buttons in axis opens when i pause the code but i think they are not working tried rev and fwd but it di=oesnt do anything


also not working in gmocccapy
pls tell me what am i doing wrong

Please Log in to join the conversation.

Time to create page: 0.079 seconds
Powered by Kunena Forum