HAL widgets not showing in glades vcp

im using debian 9 it doesnt have glades preinstalled so i installed it manually but i cant see any hal widgets in glades vcp
also sudo apt-get install glade-gtk2 this says unable to locate pakakge
any help would be greatly appreciated

Hi,

This sample is for a 64 bit install to get the linuxcnc glade widgets loaded. You can find the files for 32 bit install in the same way.

linuxcnc.org/dists/wheezy/base/binary-amd64/libgladeui-1-11_3.8.0-0ubuntu6_amd64.deb
linuxcnc.org/dists/wheezy/base/binary-amd64/glade-gtk2_3.8.0-0ubuntu6_amd64.deb
linuxcnc.org/dists/wheezy/base/binary-amd64/glade-gnome_3.8.0-0ubuntu6_amd64.deb
Unpack in terminal :
$ sudo dpkg -i libgladeui-1-11_3.8.0-0ubuntu6_amd64.deb
$ sudo dpkg -i glade-gtk2_3.8.0-0ubuntu6_amd64.deb
$ sudo dpkg -i glade-gnome_3.8.0-0ubuntu6_amd64.deb

Now you have also the glade program fully functional for your linuxcnc needs.

To install glade :
sudo apt-get install glade

@grotius
Hi,
I've been looking into your HAL-Widgets project:
One question I have: after starting the QtApp,
I have the pins and the comp in halui;
However, the comp state stays in initializing, never turning to ready;
I could not find any info's about the state of the comps;

Any info would be nice.

Best regards.