Plasmac parport connections

More
7 years 3 months ago #139380 by phoenix
Plasmac parport connections was created by phoenix
Sorry... Guys i know I'm doing same thing again as i posting this in another thread but what to do I'm so desperate to get ans
Someone will help me to make parport connections in plasmac
Or just tell me where to make them
Like hal file name

Please Log in to join the conversation.

More
7 years 3 months ago #139384 by phillc54
Replied by phillc54 on topic Plasmac parport connections
linuxcnc.org/docs/devel/html/plasma/plasmac-user-guide.html

Please Log in to join the conversation.

More
7 years 3 months ago #139385 by phoenix
Replied by phoenix on topic Plasmac parport connections
I dont need user guide i read it already
PLS STOP CONFUSING ME AND JUST SIMPLY TELL ME HOW TO OR WHERE TO DO PARPORT CONNECTIONS IN YOUR DAMN CONFIG :angry: :angry: :angry:

Please Log in to join the conversation.

More
7 years 3 months ago #139386 by phoenix
Replied by phoenix on topic Plasmac parport connections
I also dont see plasmac configurator. Py

Please Log in to join the conversation.

More
7 years 3 months ago #139387 by phoenix
Replied by phoenix on topic Plasmac parport connections
You are providing jumbling info
And them blame me for posting too much questions..
I know that you are some kind of genius or teacher or something
But I'm not so next time you answer pls try to include
DO STEP AND DIR CONNECTIONS. HERE..........
THANK YOU

Please Log in to join the conversation.

More
7 years 3 months ago #139389 by tecno
Replied by tecno on topic Plasmac parport connections
Please stop acting like a child!! READ THE MANUAL !!!!!

4.6. Add PlasmaC To Base Machine
You need to have a fully tested and working base machine configuration before proceeding.
Is that so hard to understand?

Please Log in to join the conversation.

More
7 years 3 months ago #139390 by phoenix
Replied by phoenix on topic Plasmac parport connections
Well ok i have a machine named my mill i run configrator and enter the following
Arc voltage hal pin pin 11 in
Float sw 10 in
Is this right????
In hal I chose mymill. Hal

Please Log in to join the conversation.

More
7 years 3 months ago #139392 by phoenix
Replied by phoenix on topic Plasmac parport connections
Also i m unable to share pics due to high quality of my mob camera....
Admin is great
Waht the hell i need to type inside arc voltage hal pin and float sw hal pin

Please Log in to join the conversation.

More
7 years 3 months ago #139393 by phoenix
Replied by phoenix on topic Plasmac parport connections
You are blaming me for posting continuesly
But thats why forums are made to discuss knowledge amd NOW I'M NOT GONNA STOP UNTIL I GET MY ANSWER

Please Log in to join the conversation.

More
7 years 3 months ago #139394 by phillc54
Replied by phillc54 on topic Plasmac parport connections
For the float switch enter the hal name of the parport pin you have connected the float switch to.
What are you using to sample the arc voltage?

Please Log in to join the conversation.

Time to create page: 0.373 seconds
Powered by Kunena Forum