external manual remote for linuxcnc

Hi,

I'm searching to plug an external remote to move manually my cnc, I found this on aliexpress: fr.aliexpress.com/item/32996223161.html?...&transAbTest=ae803_3

I wonder if this is compatible with linuxcnc and if there is a tuto to configure it?

Thanks in advance,

Simon

Not sure that one will work out of the box, but there are others that do work.
There is the possibility of making that one work also but it would require some programming or a new driver, both not to much complicated to do but do require time.
Plenty of info here:
www.google.com/search?ei=eY0sXaSTFor16QT....gws-wiz.btNmgXVuaEo