Planned to Buy a rotary encoder!

1pc OMRON 60P Incremental Rotary Encoder 60p/r E6B2-CWZ3E NPN Volt Output

Item Description：


Resolution: 60p/r
Power source: 5-12V DC
Current draw : < 100mA
Shaft: 6mm Dia, 12mm Length
Size: 39mm Dia, 38mm Length
Output signal：A B Z 3 phase rectangular orthogonal pulse circuit NPN type volt output
Output resistance ： 2K ohms
Maximum mechanical speed: 6000 R / min
Response frequency: 0-100KHz
Cable length: 2 meter 5-core shielded cable

Package include follow :
Encoder x 1 ， Coupling x 1 ，Spannerpa x 1 ，and English Manual
notice :

Vcc: + power, V0: ground ,Connection color is clearly marked on nameplate ,

A B Z 3 phase output must not be directly connected with VCC, otherwise,

will burn the output triode.

Is it good?

Omron = always good.

Omron is good.

Make sure that the interface is exactly what you want/need. The CWZ3E part.
They make the same encoder with several different interfaces.

Response frequency: 0-100KHz

My bob is 20kHz can I work with this encoder.
my max rpm 2000

www.ia.omron.com/data_pdf/cat/e6b2-c_ds_e_6_1_csm491.pdf?id=487

What should be output configuration of encoder.
I have only 20kHz bob and will encoder need a circuit to filter signal to send bob?

Voltage Output should work directly to the BoB.

what is your encoder?
is it Omron too?

5 to 12 VDC Voltage output
10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600
E6B2-CWZ3E (resolution) 0.5M
Example: E6B2-CWZ3E 10P/R 0.5M

Hakan wrote: Omron is good.

Make sure that the interface is exactly what you want/need. The CWZ3E part.
They make the same encoder with several different interfaces.

what is your encoder?
is it Omron too?

5 to 12 VDC Voltage output
10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600
E6B2-CWZ3E (resolution) 0.5M
Example: E6B2-CWZ3E 10P/R 0.5M

Encoders
www.ia.omron.com/data_pdf/cat/e6b2-c_ds_e_6_1_csm491.pdf?id=487