7i80+7i33

More
7 years 2 months ago #141618 by kavindu1
7i80+7i33 was created by kavindu1
im new to linuxcnc i have 3 axix miling machine with analog servo
can i use 7i80hd-16 earthnet io card with 7i33 ta analog servo daughter card
if there firmware for 7i33

Please Log in to join the conversation.

More
7 years 2 months ago #141621 by PCW
Replied by PCW on topic 7i80+7i33
Yes, the 7I33 will work with the SVST4xx firmware

Please Log in to join the conversation.

More
7 years 2 months ago #141689 by kavindu1
Replied by kavindu1 on topic 7i80+7i33
thanks for your reply

Please Log in to join the conversation.

More
7 years 2 months ago #141870 by kavindu1
Replied by kavindu1 on topic 7i80+7i33
7i80hd_25_svst8_4 is this firmware work with 7i33

7i80+7i33

Please Log in to join the conversation.

More
7 years 2 months ago #141880 by PCW
Replied by PCW on topic 7i80+7i33
Yes, if you have a 7I80-25

Please Log in to join the conversation.

Time to create page: 0.090 seconds
Powered by Kunena Forum