firmware for 7i97 mesa card

lagun@1:~$ git clone github.com/jethornton/mesaflash.git
fatal: destination path 'mesaflash' already exists and is not an empty directory.
lagun@1:~$ git clone github.com/jethornton/mesaflash.git
fatal: destination path 'mesaflash' already exists and is not an empty directory.
lagun@1:~$
is copy and past the wrong way to enter git clone ?

If you want to retry you probably have to
cd ~
rm -rf mesaflash

and then try again

What OS are you using? maybe the new mesaflash was installed but the old one is somewhere else and ahead of it in the search path

linuxcnc-stretch-uspace-amd64-r13.iso

Strange, well in any case you can run the local copy of mesaflash you built with
cd ~/mesaflash/mesaflash
./mesaflash

Thank you!
cd ~/mesaflash/mesaflash
./mesaflash
actually worked :0
Sure you got bigger fish to fry, but if you can think of a way to delete the old mesaflash please let me know.
meanwhile i'll try to think of more dumb questions
Thanks again

you shoudt try a sudo update to get the depencies right
and check the source file if the buildbot is correct there
buildbot.linuxcnc.org/