Setup a Logging file for LinuxCNC

Hello, please could someone assist us to setup a configuration that logs all errors within LinuxCNC only.
We need date and time and details of the error that occurred. Such as the Smart serial card errors, joint 1 on limit switch error.

Thank you,

Easiest way is to start linuxcnc from the command line and erorrs are logged to the terminal window. Perhaps linuxcnc > mylog.txt might work..

Smart serial card errors are only if the 5v isent correct hook up a thick 2000uA Elko and you are fine on that
joint1 limit swich is a EMI detatct so is the cable grounded to this switch is the E-chain grounded if it is a Metall Plastic one

pl7i92 wrote: Smart serial card errors are only if the 5v isent correct hook up a thick 2000uA Elko and you are fine on that

That should be 2000uF, i think.