- Posts: 88
- Thank you received: 0
Linuxcnc 2.7.15 released - query regarding TP bugfixes
6 years 9 months ago #153978
by curtisa
Linuxcnc 2.7.15 released - query regarding TP bugfixes was created by curtisa
Hi guys,
Noticed that 2.7.15 has just been made public - nice!
Have a quick query regarding a couple of the changes listed for the trajectory planner. I notice that there are a couple of bug fixes listed for arc blending:
Are any of the above related to an older issue with momentary 'hiccups' when performing some arc moves, like this one for example?
Noticed that 2.7.15 has just been made public - nice!
Have a quick query regarding a couple of the changes listed for the trajectory planner. I notice that there are a couple of bug fixes listed for arc blending:
Code:
TP: fix fallback to parabolic blending when tangent blend fails (fixes #477)
TP: fix accel violation with G96 and arc blending
TP: fix exact-stop when falling back to alternative blend methods
TP: fix accel violations with near-tangent segments (fixes #546)
TP: apply minimum displacement checks consistently (fixes #550)
Are any of the above related to an older issue with momentary 'hiccups' when performing some arc moves, like this one for example?
Please Log in to join the conversation.
6 years 9 months ago #154068
by curtisa
Replied by curtisa on topic Linuxcnc 2.7.15 released - query regarding TP bugfixes
Never mind - just updated to 2.7.15 and tried a couple of gcodes that used to give me occasional stop-starts during helical moves, and the problem seems to have gone away!
Nice work, Devs!
Nice work, Devs!
Please Log in to join the conversation.
Time to create page: 0.144 seconds