linuxcnc

getyers
Topic Author
Offline
New Member

6 years 9 months ago #153992 by getyers

linuxcnc was created by getyers

hello every one.
how to install linuxcnc 2.7.15 onto linuxcnc 2.7.15
sorry i meant to say 2.7.15 onto 2.7.14

Please Log in to join the conversation.

aleksamc
Offline
Platinum Member

6 years 9 months ago #154105 by aleksamc

Replied by aleksamc on topic linuxcnc

1) You should open terminal window
- right click at desktop > open terminal here.
2) In terminal write:
- sudo apt-get update
- sudo apt-get upgrade

And it's all.

Please Log in to join the conversation.

andypugh
Offline
Administrator

6 years 9 months ago #154368 by andypugh

Replied by andypugh on topic linuxcnc

Or, alternatively, open the Synaptic package manager, and look for LinuxCNC there.

Or, even, just wait for the system to tell you that updates are available.

Please Log in to join the conversation.

Time to create page: 0.095 seconds