Pendant WHB04B on LinuxCNC 2.7 / Debian

Great,

This means that the XHC-WHB04B-4 pendant will work after an update of LinuxCNC ?

If so, I'll wait

i think the rules file provided is wrong

try this one please

Same problem.
I've changed the ATTR to eb93 myself a few hours ago.
I saw in the results of lsusb that it had to be eb63

At the end you ATTR is eb63 ? (not eb93)

if this is eb63 please try this binaries (edit : removed)

Or maybee is needed to do in the binaires folder : sudo chmod +x xhc-whb04b-6

The driver is only tested with 6 axis version.

I moved a step forward after "sudo chmod +x xhc-whb04b-6 "

But another error message now

There is a missing bracket on the first line of xhc-whb04b-6 file.
)

You mean the file in the binary folder?
I can't edit this file. It is not a text file .

Peter.

If you have LinuxCNC 2.9 installed follow Talla83's video and use the driver he supplied in the video, if you understand German and you get the MPG running fine.

I have the XHC-WHB04B-6 running with this diver. There is one trap i can tell ou the solution if u are running in. If you try it in a fresh installation of LCNC 2.9 you will not get any errors.

Best,
Udo

Attached latest binaries + exemple config for 6 axis version tested and used all this evening.

Still an error message