proma sd step/dir

what gui for the use of PROMA SD STEP/DIR

Any of the normal Axis or Gmoccapy will do just fine, but you might want to use PlasmaC as it has other features included, like material thickness and based on that it will adjust the cut feed rate, and probing if you have a floating head on the Z axis.

I've got a feeling that to use plasmac will take a fair bit of hacking to unhook all of the THC stuff, so I think I'd build a simple working config in axis first. If the SD does not probe by itself, use a simple touch off routine in gcode will be the trick