linuxcnc.org site down - Is mirror available ?

More
6 years 4 months ago #171726 by jfryers
linuxcnc.org site down - Is mirror available ? was created by jfryers
The linuxcnc.org website has been down now for several days now ?

Is there alternate mirror site available for ISO's, documentations, wiki, etc...

Regards

Julian

Please Log in to join the conversation.

More
6 years 4 months ago #171728 by tommylight
Replied by tommylight on topic linuxcnc.org site down - Is mirror available ?
It is working, and has been all the time, at least i did not notice any issues and i use it very often.

Please Log in to join the conversation.

More
6 years 4 months ago #171732 by Clive S
Replied by Clive S on topic linuxcnc.org site down - Is mirror available ?

tommylight wrote: It is working, and has been all the time, at least i did not notice any issues and i use it very often.


Same here :)

Please Log in to join the conversation.

More
6 years 4 months ago #171736 by bbsr_5a
Replied by bbsr_5a on topic linuxcnc.org site down - Is mirror available ?
no problems from Europa
www.linuxcnc.org/testing-stretch-rtpreempt/

Please Log in to join the conversation.

Time to create page: 0.088 seconds
Powered by Kunena Forum