Suggested Post Processor for Precix 5100 with Mesa controller

More
5 years 11 months ago #189015 by quarklark
Suggested Post Processor for Precix 5100 with Mesa controller was created by quarklark
I'm looking for a Post Processor file to use with our Precix 5100 CNC, but I can't find anything on the Precix site. Is there a generic / suggested one?

This is our machine: github.com/quarklark/GSS-CNC/wiki/machine-specifications

Please Log in to join the conversation.

More
5 years 11 months ago #189272 by tommylight
Replied by tommylight on topic Suggested Post Processor for Precix 5100 with Mesa controller
Checked again, but there is no useful info there.
Try:
Inkscape
BlenderCAM
FreeCAD
PyCAM
NCAM or NativeCAM that is an add on for LinuxCNC

Please Log in to join the conversation.

Time to create page: 0.255 seconds
Powered by Kunena Forum