Tooltable limit solution

More
5 years 10 months ago #191949 by mlhilligsoe
Tooltable limit solution was created by mlhilligsoe
Hi,
I've read that there is a 56 tool limit in the tooltable due to "technical resons".
I'm looking to build a custom toolchanger with room for all my tools, and the 56 limit is an issue.

What is the cause of this limit, and is there a way to work around it, or a hotfix that could be compiled into LinuxCNC?

Please Log in to join the conversation.

More
5 years 10 months ago #191951 by verticalperformance
Replied by verticalperformance on topic Tooltable limit solution
V2.8.0 Tool table limit extended to 1000 tools.

Please Log in to join the conversation.

More
5 years 10 months ago #191961 by mlhilligsoe
Replied by mlhilligsoe on topic Tooltable limit solution
Thats great! Problem solved :)

For future info, where can I find the information that this has been fixed? I tried searching online, but wasn't able to find any information that it had been fixed.

Please Log in to join the conversation.

More
5 years 10 months ago #191965 by Aciera
Replied by Aciera on topic Tooltable limit solution
7th listing:
linuxcnc.org/2020/09/08/LinuxCNC-2.8.0/

Please Log in to join the conversation.

Time to create page: 0.278 seconds
Powered by Kunena Forum