Possible to remap M9?

cmorley
Offline
Platinum Member

5 years 8 months ago #200247 by cmorley

Replied by cmorley on topic Possible to remap M9?

This works (though I swear I tried this before)

Code:

def remap_m9(self,**words):
    try:
        emccanon.enqueue_MIST_OFF()
        self.mist = False
        emccanon.enqueue_FLOOD_OFF()
        self.flood = False
        return INTERP_OK
    except Exception, e:
        return "Ignore M6 failed: %s" % (e)

Please Log in to join the conversation.

newbynobi
Offline
Platinum Member

5 years 8 months ago #200355 by newbynobi

Replied by newbynobi on topic Possible to remap M9?

Chris, if you remap code or have a sub with no movement, the machine will remain in MDI mode and no signal Idle will be emitted. I found that adding a G4 to the end results in an idle signal.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

5 years 8 months ago #200358 by cmorley

Replied by cmorley on topic Possible to remap M9?

Ahh i see now. thanks

Please Log in to join the conversation.

Time to create page: 0.038 seconds