Position Logger

More
5 years 8 months ago #199620 by BigJohnT
Position Logger was created by BigJohnT
I've updated the Position Logger to record by time intervals and added a couple of menu items as well as a context menu. There is a deb so installation is easy and it puts the menu in the CNC menu.

NOTE: currently this is programmed for Python 2 so it needs to be converted.

jethornton.github.io/emclog/index.html

 

Attachment not found



JT

Please Log in to join the conversation.

More
5 years 8 months ago #199647 by tommylight
Replied by tommylight on topic Position Logger
Made it a sticky as it is not easy to find when needed.
Thank you JT.

Please Log in to join the conversation.

More
4 years 9 months ago #230934 by Bironbrandy
Replied by Bironbrandy on topic Position Logger
nice

Please Log in to join the conversation.

More
4 years 3 weeks ago #253662 by tommylight
Replied by tommylight on topic Position Logger
Spammer booted.

Please Log in to join the conversation.

More
3 years 9 months ago #263261 by tommylight
Replied by tommylight on topic Position Logger
Spammer booted, again ! :)

Please Log in to join the conversation.

More
1 year 10 months ago #315868 by Aciera
Replied by Aciera on topic Position Logger
Deleted a bunch of suspected spam setups.

Please Log in to join the conversation.

More
1 year 10 months ago #316760 by Thayloreing
Replied by Thayloreing on topic Position Logger
Good morning, I'm a little curious, I didn't quite understand what you meant in this topic, could you explain it to me better?

Please Log in to join the conversation.

More
1 year 10 months ago #316786 by JT
Replied by JT on topic Position Logger
It's a tool to record positions to a file for later use.

JT

Please Log in to join the conversation.

Time to create page: 0.728 seconds
Powered by Kunena Forum