Best cad&cam programs for 3d drilling

More
5 years 6 months ago #206225 by Bahaa_Asem
Best cad&cam programs for 3d drilling was created by Bahaa_Asem
I am doing a retrofit for a drilling machine and all the process begining from drawing holes in 3d to postprocess to g-code are done on machine computer what are best programs for this process
best regards

Please Log in to join the conversation.

More
5 years 6 months ago #206523 by andypugh
Replied by andypugh on topic Best cad&cam programs for 3d drilling
Do you need 3D for a drilling machine?

I think perhaps SheetCAM might be a good fit. Input a 2D drawing of hole positions and enter the depth of each hole.

Please Log in to join the conversation.

Time to create page: 0.088 seconds
Powered by Kunena Forum