Program pause on M5

More
5 years 1 month ago #219607 by mb_cnc
Program pause on M5 was created by mb_cnc
Hello, is it possible to disable the program pause on M5 command? I'm using Silver Dragon with master and a M6 remap.

thanks

Please Log in to join the conversation.

More
5 years 1 month ago #219609 by tommylight
Replied by tommylight on topic Program pause on M5
M5 does not pause anything, but if you have spindle at speed in use it might pause till spindle slows down.
Not sure about this as it's been a while since i used mills, but i am sure M5 does not pause as i use it daily for plasma.

Please Log in to join the conversation.

More
5 years 1 month ago #219628 by mb_cnc
Replied by mb_cnc on topic Program pause on M5
Tommylight, yes you are correct. It's either M0 or M1 and it was a post option.

thanks

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum