Ethernet controller recommendations

More
5 years 3 weeks ago #222256 by Jmh474
Ethernet controller recommendations was created by Jmh474
Good morning all
just after some advise please, can anyone recommend a Ethernet based controller for linuxcnc.

And one that not to expensive pleaseAt the the moment I'm using 2 parallel port brake out boards and I would like to upgrade them.

Thanks

Please Log in to join the conversation.

More
5 years 3 weeks ago #222267 by tommylight
Replied by tommylight on topic Ethernet controller recommendations
Mesa 7i92 or Mesa 7i96 or Mesa 7i76E or Mesa 7i95, for step/dir systems.

Please Log in to join the conversation.

More
5 years 3 weeks ago #222312 by rollfree
Replied by rollfree on topic Ethernet controller recommendations
Don't forget my beloved 7i93.

Please Log in to join the conversation.

Time to create page: 0.824 seconds
Powered by Kunena Forum